Product Information
| Product Name | One Step UALB Urine Test |
| Model |  |
| Intended Use | This product is a rapid chromatographic immunoassay for the qualitative detection of microalbuminuria in human urine. |
| Test Method |
▶ Strip (1) Remove the device from the sealed pouch. (2) With arrows pointing toward the urine sample, immerse the device vertically in the urine sample for at least 10 seconds. Alternatively, draw sample with dropper and then add 1-2 drops of sample into the sample well of strip (3) Start timing and observe the result within 5-10 minutes. ▶ Cassette (1) Remove the device from the sealed pouch and lay it on a flat surface. (2) Take out the dropper provided with the device, draw urine and then continuously add 2-3 drops into the sample well. (3) Start timing and observe the result within 5-10 minutes. ▶ Midstream (1) Remove the device from the sealed pouch. (2) Hold the handle of the device, take off the cap (if any), then directly urinate towards the absorbent tip for 2-3s. After that put on the cap (if any) and lay the device on a flat surface or keep holding it flat. The alternative method is that hold the handle of the device, take off the cap (if any), immerse the device vertically in the urine sample for at least 10 seconds. Remove the device from urine sample and lay it on a flat surface or keep holding it. (3) Start timing and observe the result within 5-10 minutes. |
|
Interpretation of Results |
|
